Installation checklist for Eaton Green Motion Chargers

Please fill in and sign this document.

Prior to installation it is required to download, read, and understand the step-by-step instructions from the latest installation manual provided. This checklist is supplementary and does not replace the installation manual. The checks described here must be carried out only by professional installers.

You can visit the central product page to find your specific charger model and download additional resources, including technical documentation at:

https://www.eaton.com/ch/en-gb/products/emobility/ev-charging.html

If the information in this form applies to multiple chargers of the same model, please list all serial numbers this information is true for. Please complete a separate form to describe any exceptions.

Note: Enabling the charging station may take up to 48 working hours.

General information

Customer Name:

Location/Site Name:

Installation date:

Model#:

Serial#:

Installation checklist

1.1 TECHNICAL DOCUMENTATION

Has the installation manual been successfully downloaded?

1.2 PACKAGING / TRANSPORT

If the chargers were ordered directly and delivered by Eaton;
Did the charging station(s) arrive without any marks, dents, or visible defects?

1.3 CONNECTION CHECKS

Has a circuit breaker of the correct rating been installed on the supply side as specified in the installation manual?

Type of circuit breaker installed:

Rated current of circuit breaker:

Do local regulations require a RCD to be installed (in case of AC charger) according to IEC 61851-1:2017?

Type of RCD installed:

Tripping current of RCD:

What is the voltage measured between:

Phase L1 and L2:

Phase L1 and L3:

Phase L2 and L3:

What is the phase sequence of the power supply (depending on measurement device)?

Note: The charger will not operate properly if the phase sequence is not correct

Cross-section of the used wires?

What is the earthing system in which the charger is installed?

TN-C
TN-C-S
IT

TN-S
TT

If any of the above checks have not been performed or if any of the values deviate from the recommendations in the installation manual, please summarise the reasons for deviation:

By signing this form, I hereby confirm that all checks have been executed and the information given in this form is accurate.

Installer Name

Email Address

Country

Warning! It is required to send the checklist to Eaton by clicking the button "Submit". For information about commissioning of the EV charger, please click on "Go to commissioning page" on the next page.